General information

IMO:
MMSI:
232031441
Callsign:
MIIW2
Width:
8.0 m
Length:
24.0 m
Deadweight:
Gross tonnage:
TEU:
Liquid Capacity:
Year of build:
Class:
AIS type:
Tug
Ship type:
Flag:
United Kingdom
Builder:
Owner:
Operator:
Insurer:

Course/Position

Position:
Navigational status:
Undefined
Course:
133.7° /
Heading:
133.0° /
Speed:
Max speed:
Status:
moored
Location:
Kingston upon Hull (King George Dock)
Area:
United Kingdom
Last seen:
2022-06-30
877 days ago
Source:
T-AIS
Destination:
ETA:
Summer draft:
Current draft:
Last update:
877 days ago
Source:
T-AIS
Calculated ETA:

Not visible with your account? Upgrade here...

Upgrade

Latest ports

Port
Arrival
Departure
Duration
2022-06-21
2022-06-30
9d 10h 28m
2022-06-21
2022-06-21
40m
2022-06-20
2022-06-21
19h 49m
2022-06-20
2022-06-20
1h 26m
2022-06-17
2022-06-20
2d 20h 18m
2022-06-17
2022-06-17
52m
2022-06-11
2022-06-16
4d 8h 24m
2022-05-29
2022-06-11
13d 8h 56m
2022-05-26
2022-05-29
3d 5h 30m
2022-05-20
2022-05-26
5d 12h 20m
Note: All times are in UTC

Latest Waypoints

Waypoints
Time
Direction
-
-
-

Latest news

Accident investigation report on allision in Hull published

Fri Jun 14 11:08:33 CEST 2024 Timsen

On June 13, 2024, an accident investigation report has been releasedon the allision between the trawker 'Kirkella' (IMO: 9808405) and the unmanned 'Shovette' at the King George Dock in Hull on June 24, 2022. The incident resulted in pollution and raised safety concerns. On that day, while the trawler was docked at Hull, the crew of the 'Kirkella' lost control of its propulsion system. The vessel allided with the 'Shovette', which was moored ahead and hat its hull and starboard fuel tank breached by the 'Kirkella'’s bulbous bow. As a result, approximately 7,000 litres of marine diesel oil spilt into the dock. There were no injuries, the 'Kirkella' suffered minimal damage. The pitch levers for the 'Kirkella'’s propulsion control system were not aligned between the bridge and engine control room during control transfer. The 'Kirkella'’s engineer failed to check the pitch lever when control was passed between the bridge and the engine room. There was no established procedure for control changeover. The classification society’s rules for remote control of engines were not in line with international unified requirements. The report included the following recommendations: - Det Norske Veritas (DNV): Propose a review of Unified Requirement M43.12 to clarify its intent. - Inform customers that the Rolls-Royce Helicon-X3 system may allow remote control station changeover with mismatched levers and recommend contacting the manufacturer for advice. - Kongsberg Maritime: Issue a service letter to customers advising them that the Rolls-Royce Helicon-X3 system’s remote control changeover process can lead to significant alterations in propelling thrust due to mismatched levers. Provide guidance on operation and rectification if requested. In addition to the report, a safety flyer has been distributed within the shipping industry. It emphasised the risk associated with mismatched propeller pitch levers during control transfer and suggests potential mitigation measures.

Upload News

Daily average speed

Not visible with your account? Upgrade here...

Upgrade

Distance travelled

Not visible with your account? Upgrade here...

Upgrade

Ship master data